Error Codes

fisher-paykel-appliance-error-codes

Looking at a Fisher & Paykel error code on your Refrigerator, Range/Oven, DishDrawer™ dishwasher, or Washer/Dryer? You’re in the right place. On this page, our professional, factory-trained technicians translate the most common Fisher & Paykel error codes into plain English—what each code means, the likely causes, and the smartest first steps you can try at home. Whether it’s a refrigerator temperature or fan alert, an oven ignition/sensor warning, a DishDrawer™ fill, drain, or heater fault, or a washer out-of-balance/thermistor message, the tables below map code → cause → next move so you can quickly decide between a simple DIY check and a professional repair.

If the same code keeps coming back, a cycle won’t complete, or you just want a fast, no-guesswork fix, call 844-504-0521 or Schedule Appointment and we’ll help right away. We service Fisher & Paykel daily and use genuine OEM parts to get your kitchen and laundry running quiet, steady, and on spec.

Fisher & Paykel Oven Error Codes

Common Fisher & Paykel Oven Error Codes can be perplexing, but with our expertise, you can navigate through them seamlessly. We understand the importance of a properly functioning oven in your kitchen, and we are here to help you overcome any challenges.

Error CodesProblem
A1The oven has overheated          Learn More
A2Door lock error          Learn More
A3Door lock error: the door cannot be unlocked after a Self Clean cycle has finished          Learn More
F1Maximum allowable temperature          Learn More
F2Maximum allowable cavity temperature was exceeded during Self-Clean Pyro cycle          Learn More
F3The oven temperature is sensed at over 600°F (315°C) during normal cooking operation          Learn More
F4A fault occurred in the power module          Learn More
F5A communications error occurred between the clock module and the power module          Learn More
F7Oven door lock fault occurred          Learn More
F + NumberTechnical fault          Learn More
0:00The oven door is locked because the oven is still too hot to be used for cooking          Learn More
doorThe door has not been properly closed          Learn More
he temperature indicator shows — and the dials and buttons are unresponsive          Learn More

Fisher & Paykel Refrigerator Error Codes

Our comprehensive guides will walk you through common problems, empowering you to identify issues and, in many cases, implement solutions on your own. From temperature-related errors to malfunctions in the ice maker, we’ve got you covered.

Active Smart Refrigerator

Error CodesProblem
Fault Code 1Module failure          Learn More
Fault Code 2Defrost issue          Learn More
Fault Code 3Temperature sensor issue          Learn More
Fault Code 5FC sensor issue          Learn More
Fault Code 7Evaporator sensor          Learn More
Fault Code 9PC sensor issue          Learn More
Fault Code 11Ambient heater/PC, FC fan issue          Learn More
Fault Code 13Ambient heater fault          Learn More
Fault Code 15PC fan issue          Learn More
Fault Code 20Flapper heater issue          Learn More
Fault Code 22Water tank sensor issue          Learn More
Fault Code 24Ice tray sensor issue          Learn More
Fault Code 26Ice maker motor issue          Learn More
Fault Code 28Ice maker solenoid issue          Learn More
Fault Code 30Display harness issue          Learn More
Fault Code 40Ice maker solenoid issue          Learn More
Fault Code 42Ice maker fill tube issue          Learn More
Fault Code 49Electronic communication error          Learn More

Refrigerator Models: RX628DX1, RX628DW1, RX611DUX1

Error CodesProblem
F1PC Sensor issue          Learn More
F3Ambient sensor          Learn More
F4FC sensor issue          Learn More
F6Defrost sensor issue          Learn More
E0Electronic communication error          Learn More
E1FC fan motor issue          Learn More
E2Evaporator fan motor issue          Learn More
EdDefrost system failure          Learn More

Refrigerators (Ice & Water)

Error CodesProblem
F2Defrost fault          Learn More
F15Fridge fan          Learn More
F17Freezer fan          Learn More
F20Flapper heater fault          Learn More
F24Ice maker sensor          Learn More
F30Display Fault          Learn More

Fisher & Paykel Dryer Error Codes

From issues with the lid lock to concerns about pump or exhaust blockages, we’ll provide insights into these codes and guide you on how to address them effectively.

Error CodesProblem
F1PCB Assembly Fault          Learn More
F5Over Temperature          Learn More
F6Faulty Exhaust or Ambient Sensor          Learn More
F9Faulty Exhaust Sensor          Learn More
F10Exhaust Sensor Shorted to cabinet          Learn More
F13Over Temperature          Learn More
F15Fault Brown out          Learn More
Err6 or E6Lint Filters Blocked          Learn More
Err4 or E4Heater or Sensor Faulty          Learn More
Err2 or E2Drain Pump Failure          Learn More
E72Communication Error between the motor & PCB  (Model: DH8060C1)          Learn More
LOAmbient Temperature is Too Low (DH8060C1)          Learn More
Err3 or E3NTC1 Error (Exhaust Thermistor Error) (DE7060M1, DE5060M1, DE4060M1, DE8060P2)          Learn More

Fisher & Paykel Dishwasher Error Codes

A malfunctioning appliance can disrupt your household chores and cause inconvenience. That’s why our dedicated team is ready to provide swift and effective solutions to tackle Fisher Paykel dishwasher error codes. Whether you are experiencing a simple glitch or a more complex issue, our goal is to empower you with the knowledge needed to address Fisher Paykel dishwasher error codes efficiently.

Error CodesProblem
A1No water-the water supply hasn’t been turned on          Learn More
A3Drawer cannot drain          Learn More
A6The spray arm has loosened or come off its mounting, or water pressure is too low          Learn More
A7Dishwasher has detected excess foam in the drawer          Learn More
A09Sanitize cycle hasn’t met temperature needed to sanitize dishes          Learn More
A10No water          Learn More
A20Drain fault          Learn More
A60Water temperature error          Learn More
AD0Doorlock signal error          Learn More
F2XMotor fault          Learn More
F3XTemperature fault          Learn More
F4XHeating element failed          Learn More
F5XFault with the internal lid of the dishwasher          Learn More
F6XComponent failure          Learn More
F7XFill valve fault          Learn More
F8XElectronics fault-motor controller          Learn More
F9XElectronics fault-wash controller          Learn More
FCXElectronics fault-communication between drawers          Learn More
F1Flood switch has been activated          Learn More
F2Motor problem          Learn More
F40Water flow error          Learn More
F50Electronics error         Learn More

Fisher & Paykel Washer Error Codes

With a legacy spanning decades, Fisher Paykel has consistently delivered cutting-edge washing machines designed to make your laundry experience seamless. However, like any sophisticated appliance, these washers may encounter error codes, disrupting your daily routine. Understanding these codes is the first step towards resolving issues and ensuring your appliance operates at its optimal performance.

Fisher Paykel AquaSmart top-load washer error codes

Error CodeDescription
21, 26, 27, 49, 50 or 246Water inlet valve failure          Learn More
38 or 39Water level pressure transducer air tube failure          Learn More
58 or 68Water level pressure transducer failure          Learn More
10, 41 or 237Thermistor (water temperature sensor) failure          Learn More
1, 57, 60, 107, 108, 112, 133,, 220, 221, 222, 223, 224, 225, 226, 230, 232, 233, 236, 243, 252 or 254Motor control module failure          Learn More
45, 46, 103, 104, 105, or 106Display module failure          Learn More
234, 235, 238, or 239Lid lock is defective          Learn More
40, 56, or 160Spin basket is not engaging or disengaging from the clutch          Learn More
136 or 137Motor not running          Learn More
37, 114, 245, 247, 248, 249, 250 or 253Water not draining          Learn More
241Display module or motor control module failure         Learn More

Fisher Paykel FabricSmart washer error codes

Error CodeDescription
no hotThe washer is not getting any hot water          Learn More
no CldThe washer is not getting any cold water          Learn More
no tAPThe washer is not getting any water          Learn More
Out oF bALThe washer is out of balance          Learn More
SuD LoCThe washer has too many suds          Learn More
Lid Loc, Lid oPnThe lid can’t lock or the lid is open          Learn More
too FULThe washer is overloaded          Learn More
P:r CutThe washer has stopped          Learn More
AdrThe washer has stopped          Learn More